Kreativ 58
Image: AI-generated

Guide · 13 November 2026

Roblox Studio: Adding Sounds and Background Music

By Liska, has been playing Roblox and Murder Mystery 2 for almost three years

Add sound in Roblox Studio: get music from the Creator Store, set Volume and Looped, and test with F5. Step by step.

Contents

In Roblox Studio, you play sounds with a Sound object: you enter the ID of an audio asset in the SoundId property and turn on Playing so the audio starts when the game starts. If the object is in SoundService, it can be heard at the same volume everywhere in the game. If it is inside a Part, the volume depends on the distance. You find audio in the Creator Store, which you open directly in the Toolbox. This guide is part of our Studio series. You should have read Roblox Studio for beginners. A good place for sounds is an obstacle course (obby). Lighting with day and night also fits the mood, and for effects you can see there is the guide to particle effects.

As of 13 November 2026. On this day we checked four pages of the Roblox documentation (Sound objects, Audio assets, Creator Store, Testing modes). We have marked our own tips as “Our tip”.

What a Sound object is

According to the documentation, audio is played through Sound objects. Every audio asset has a unique ID. You assign this ID to the Sound object, in the SoundId property. The page on Sound objects points out that there are now newer audio objects. Here we only describe the Sound object, the way the page explains it.

Step 1: Find audio in the Toolbox

You can reach the Creator Store directly in the Toolbox in Studio. Audio is a category there. According to the documentation, the store contains “free-to-use audio assets made by Roblox and the Roblox community”. The page on audio assets mentions “more than 100,000 professionally-produced sound effects and music tracks from top audio and music partners”.

You can sort the results by relevance or by rating. When you click an audio asset in Studio, Studio inserts a Sound object in the Explorer. According to the page on the Creator Store, you can also drag it into the 3D area (“drag-and-drop it into the 3D viewport”). Right-click the asset and choose “Copy Asset ID” to copy the ID.

The page on audio assets does not say exactly where the new Sound object ends up in the Explorer. Our tip: Click the asset. Then, in the Explorer, drag the new Sound object into SoundService if it is meant to be background music. That way you know for sure where it is.

Step 2: Background music in SoundService

According to the documentation, a sound in SoundService or Workspace can be heard across the whole game. The volume does not depend on the position. That works well for background music.

Instead of clicking an asset, you can also insert a Sound object yourself:

  1. In the Explorer, hover over SoundService.
  2. Click ⊕ and choose Sound.
  3. In the Properties window, enter the asset ID in SoundId.
  4. If needed, turn on Playing in the Properties window.

You need these properties:

  • Playing: Starts the audio automatically when the game starts.
  • Looped: The audio starts again from the beginning when it ends. According to the documentation, this is useful for background audio so there is no sudden silence. The page recommends turning on Looped if this is meant to be the only track in the game.
  • Volume: A value from 0 (muted) to 10. It is multiplied by the loudness of the file. According to the documentation, a value up to 2 is usually enough for loud source audio.

The page does not say which value sounds good for a particular piece of music.

Step 3: A sound in one place

A sound can also come from a specific spot, for example from a campfire or a door. To do this, you put the Sound object inside a Part: in the Explorer, hover over the Part, click ⊕ and choose Sound. In the Properties window, enter the SoundId and turn on Playing there if needed.

According to the documentation, it makes a difference what the Sound is placed in:

  • Block, sphere or cylinder: The sound comes from the whole surface. The volume depends on the distance and the size of the Part. For this, the VolumetricAudio property in SoundService must be set to Enabled.
  • Attachment, MeshPart, TrussPart, WedgePart or CornerWedgePart: The sound comes from one point. The volume depends on the distance.

You set how far away the sound can be heard with these properties:

  • RollOffMinDistance: The distance in studs (the unit Roblox uses for distances) at which the volume starts to drop as you move away.
  • RollOffMaxDistance: The largest distance in studs at which you can still hear the sound.
  • RollOffMode: Inverse is the default. There are also Linear, InverseTapered and LinearSquare. With Inverse and Linear, a low RollOffMaxDistance can make the sound cut off suddenly.

The page does not give any suggested values for the distances. Our tip: Try them out by walking towards the Part and away from it again during a test.

Step 4: Speed and pitch with PlaybackSpeed

With PlaybackSpeed you change how fast the audio plays. A value of 2 is twice as fast and one octave higher. A value of 0.5 is half as fast and one octave lower. Our tip: Use it to hear what the same sound is like in a faster or lower version.

The TimePosition property shows, in seconds, which part is playing right now.

Step 5: Testing with F5

According to the page on testing modes, Test (F5) starts the simulation and places your avatar at a SpawnLocation or at about (0, 100, 0). If you have turned on Playing, the audio starts when the game starts. Our tip: Pay attention to these points during the test:

  • Is the music too loud or too quiet? Then change Volume.
  • Does the music end and everything goes silent? Then Looped is missing.
  • Do you hear the sound at the Part too early or too late? Then change RollOffMinDistance and RollOffMaxDistance.

Stop (Shift+F5) ends the test. Stop “resets all objects and instances to how they were before the playtest”. So anything you change in the properties during the test is gone again after Stop. Our tip: That is why you should change values in the editor, not while the test is running.

Our tip: Start quietly and change only one value at a time, then test with F5. That way you notice right away which setting makes the difference.

Where the information comes from

All facts come from the English-language Roblox documentation in the Creator Hub:

  • Sound objects: SoundId, location of the Sound object, VolumetricAudio, Playing, Looped, Volume, RollOff properties, PlaybackSpeed, TimePosition, note about newer audio objects.
  • Audio assets: contents of the Creator Store, clicking an asset, Copy Asset ID.
  • Creator Store: access through the Toolbox, Audio category, drag-and-drop, sorting.
  • Testing modes: Test (F5), starting point, Stop (Shift+F5), reset after the test.

Conclusion

A Sound object can play audio when SoundId contains the ID of an asset and Playing is turned on. In SoundService, music can be heard across the whole game. In a Part or Attachment, the volume depends on the distance. With Playing, Looped and Volume you set the start, the repeat and the volume. RollOffMinDistance and RollOffMaxDistance control the range, and PlaybackSpeed controls speed and pitch. The pages we checked give no suggested values for your music or for distances. Our tip: Try out suitable values, change one value after another and test with F5.

Frequently asked questions

How do I add background music in Roblox Studio?+

In the Explorer, hover over SoundService, click ⊕ and choose Sound. Then, in the Properties window, enter the ID of the audio asset in SoundId. According to the Roblox documentation, you can also turn on Playing so the music starts when the game starts, and Looped so it starts again from the beginning when it ends.

Where do I find audio for my game?+

In the Creator Store, which you open directly in the Toolbox in Studio. Audio is a category there. According to the documentation, the store contains free-to-use audio assets from Roblox and the community. You can sort by relevance or by rating.

Why can you hear a sound across the whole game or only nearby?+

It depends on where the Sound object is. In SoundService or Workspace, the sound can be heard across the whole game, no matter the position, according to the documentation. If the sound is inside a Part or Attachment, the volume depends on the distance.

How loud can Volume be?+

According to the documentation, Volume goes from 0 (muted) to 10 and is multiplied by the loudness of the file. For loud source audio, a value up to 2 is usually enough. The Roblox page on Sound objects does not say which value suits which music. Our tip: Try that out yourself.

‹ back