Guide · 03 November 2026
Roblox Studio: Particle Effects with ParticleEmitter (Fire, Smoke, Sparks)
By Liska, has been playing Roblox and Murder Mystery 2 for almost three years
With a ParticleEmitter you can create fire, smoke and sparks in Roblox Studio. Here is how to insert one, set Rate, Lifetime, Speed, Color and Size, and test the result with F5.
Contents
You build fire, smoke and sparks in Roblox Studio with a ParticleEmitter: you insert it into a Part or Attachment and then set properties such as Rate, Lifetime, Speed, Color, Size and Transparency. The three ParticleEmitter pages we checked do not give ready-made values for fire, smoke or sparks. You try them out yourself. This guide is part of our Studio series. You should have read Roblox Studio for beginners. For the lighting in your game, the guide on lighting, day and night is a good match. What Roblox actually is gets explained in What is Roblox?.
As of 3 November 2026. On this day we checked three pages of the Roblox documentation (particle emitters, the ParticleEmitter class, testing modes). We have marked our own tips as “Our tip”.
What a ParticleEmitter is
A ParticleEmitter sends out lots of small images called particles. Together they make an effect like flames, smoke or flying sparks. According to the documentation, the particles have a “white sparkle texture” by default. To start with, you stick with this default texture. You only change the settings.
Step 1: Insert the emitter
- Build a Part where the effect should appear, for example a small block as a campfire spot.
- In the Explorer, hover your mouse over the Part and click the ⊕ button.
- Choose ParticleEmitter from the menu.
The emitter appears as a child of the Part, and you can see the particles right away. According to the documentation, it matters where it sits: on a Part, it spreads the particles inside the Part. On an Attachment, they come from its position. Our tip: for an effect at one exact point, an Attachment works better.
Step 2: Amount and lifetime
These two properties decide how dense the effect looks:
- Rate: How many particles are created per second. According to the documentation, one emitter can manage at most 400 per second, and 100 on mobile devices.
- Lifetime: How long a particle lives, in seconds. You can set a minimum and a maximum. The longest possible lifetime is 20 seconds.
The page advises keeping the rate as low as possible and experimenting with Size and other properties. According to the documentation, lots of particles (especially when they overlap) and very large particles put a strain on the graphics of the computer or phone.
Step 3: Movement with Speed and Acceleration
Speed is a number range for the starting speed of the particles, measured in studs per second. They fly in the direction of the EmissionDirection. Negative values flip the direction. Important: if you change Speed, it does not affect particles that are already on their way. For particles in flight there are other properties: according to the documentation, Acceleration, Drag and VelocityInheritance can change their speed during their lifetime.
With SpreadAngle you decide how widely the particles fly apart. An example on the class page shows (0, 0) for no spread. With EmissionDirection you choose the side of the Part the particles come out of.
Step 4: Color, size and transparency
These three properties can change over a particle’s lifetime:
- Color: A color gradient (ColorSequence). So a particle can have a different color at the start than at the end.
- Size: The size, also as a sequence (NumberSequence).
- Transparency: How see-through it is. 0 is fully opaque, 1 is completely see-through. This can also be a sequence.
Transparency helps you avoid particles popping up harshly: if you fade particles out at the start or end of their lifetime, you avoid a “popping in/out effect”, according to the documentation.
Step 5: Glow with LightEmission
LightEmission controls how the particles are blended. A value of 0 uses the normal blending mode, a value of 1 the additive one. Higher values make the particles glow even in low light.
Step 6: Try out fire, smoke and sparks
The three ParticleEmitter pages we checked do not give ready-made values for fire, smoke or sparks. So this is a suggestion to try out, not a rule.
Our tip: build three Parts side by side, each with its own ParticleEmitter. Change only one property at a time and look at the result. These questions will help you:
- Fire: Which Color suits flames? How does it change from the start to the end of the lifetime? Does the effect look warmer with a higher LightEmission?
- Smoke: What does it look like when the particles get bigger and more see-through over time? What happens with a low LightEmission?
- Sparks: What changes with a higher Speed and a wider SpreadAngle? What do short Lifetime values look like?
Write down values you like. That way you can find them again later.
Step 7: Test with F5
According to the page on testing modes, Test (F5) starts the simulation. Your avatar appears at a SpawnLocation or at about (0, 100, 0). Stop (Shift+F5) ends the test. Then all objects are reset “to how they were before the playtest”. So your settings stay the way you set them before. The other way round, anything you change on the particles during the test is gone again after Stop.
The particles do not look the same for every player, because they depend on the graphics settings. The documentation advises searching for “Editor Quality Level” in the Studio Settings and testing both the lowest and the highest level.
Where the information comes from
All facts come from the English-language Roblox documentation on the Creator Hub:
- Particle emitters: inserting, Part or Attachment, default texture, Rate, Lifetime, Speed, Acceleration and Drag, EmissionDirection, SpreadAngle, Color, Size, Transparency, LightEmission, Editor Quality Level.
- ParticleEmitter class: code example with Color, Size, Transparency, SpreadAngle (0, 0), EmissionDirection.
- Testing modes: Test (F5), starting point, Stop (Shift+F5), resetting after the test.
Conclusion
A ParticleEmitter creates effects from lots of small particles. With Rate and Lifetime you set the density, with Speed and SpreadAngle the movement, with Color, Size and Transparency the look, and with LightEmission the glow. The three ParticleEmitter pages we checked do not give ready-made values for fire, smoke or sparks, so you find them by trying things out. Our tip: change only one value at a time and test with F5.
Frequently asked questions
How do I insert a ParticleEmitter in Roblox Studio?+
In the Explorer, hover your mouse over a Part or Attachment and click the ⊕ button. In the menu, choose ParticleEmitter. According to the Roblox documentation, an emitter on a Part scatters the particles inside the Part, while on an Attachment they come from its position.
How many particles can one emitter create?+
According to the documentation, no more than 400 particles per second, and 100 per second on mobile devices. A particle's lifetime is limited to 20 seconds. The page advises keeping the rate as low as possible.
How do I make particles glow?+
With LightEmission. According to the documentation, a value of 0 uses the normal blending mode and a value of 1 uses the additive blending mode. Higher values make particles glow even in low light.
How do I stop particles from suddenly appearing or disappearing?+
With Transparency. A value of 0 is fully opaque, 1 is completely see-through. The documentation says that fading out at the start or end of the lifetime avoids a “popping in/out effect”.